Felix Dan
Felix Dan
  • 154
  • 3 693 078
Mazda CX 5 Spark Plugs LOW Idle Issue // Genuine Vs Fake IRIDIUM PLUGS DENSO TWIN TIP
Hi guys just would like to share , Recently i have experience Intermitten Low idle issue on my Mazda CX 5. So long story cut short , i discover & confirmed that it needs a New Spark Plugs !
Went away to purchase parts online and i got fooled scammed as they sent me a counterfeit Spark Plugs. I was fooled by the appearance and nearly got me believe it was the original. Very lucky i did not gone ahead and do the service before.
Second thought of me I decide to purchase another set from Authorize Dealer Denso. The comparison was historical. Luckily i did carefully done abit of my research otherwise i could potentially adding another issues to this car.
New Spark Plugs :
Denso Iridium Twin Tip IXEH22TT
Or you can use the Original OEM Mazda Spark Plugs:
PE5R-18-110 (ILKAR7L11)
I hope you find this video useful and becareful next time purchasing your auto car parts online.
Support this channel Like , Share & Subscribe Love yall.
Get connected IG @ felixdan_
Переглядів: 573

Відео

Beware of these FAKE Denso spark plugs in your country! Do not put em on your car. Fake IXEH22TTBeware of these FAKE Denso spark plugs in your country! Do not put em on your car. Fake IXEH22TT
Beware of these FAKE Denso spark plugs in your country! Do not put em on your car. Fake IXEH22TT
Переглядів 51425 днів тому
Just beware of these Denso imitation Iridium Twin tip IXEH22TT / IXEH20TT spark plugs. These ones are a good example of Counterfeit sparkplugs. If u were to install them to your car be prepared to spend some $$$ when they fail inside your vehicle engine. This particular ones ive purchase from Indonesia region Online for a cheap deal. I did confirm with the seller wether they are Fake or Genuine...
Why Wont it start ? No Crank & Clicks Only ? Issue Fixed Honda Accord CR2 2013 - 2017 👍🏼Why Wont it start ? No Crank & Clicks Only ? Issue Fixed Honda Accord CR2 2013 - 2017 👍🏼
Why Wont it start ? No Crank & Clicks Only ? Issue Fixed Honda Accord CR2 2013 - 2017 👍🏼
Переглядів 293Місяць тому
This Honda Accord 2017 have a intermitten Starting issue when you press the Engine start button. You will hear a Clicked Noise. Please Watch this video so next time your car has a similar issue you can check the Starter Motor and fix it yourself. 👍🏼
Steering bersuara klotak & limbung ? Wajib Check & Ganti bushing stabilizer. Isuzu Panther PickupSteering bersuara klotak & limbung ? Wajib Check & Ganti bushing stabilizer. Isuzu Panther Pickup
Steering bersuara klotak & limbung ? Wajib Check & Ganti bushing stabilizer. Isuzu Panther Pickup
Переглядів 132Місяць тому
Time to renew these stabilizer links bushings / stabilizer Bar bushing Kit on this Isuzu Panther / Toyota Kijang Pickup Ute. Using 525 bushing kit Made in Indonesia . Lets get to work !
Protoflex Polyurethane Bushing Upgrade Mazda CX5 Skyactiv #automobile #mazdacarsProtoflex Polyurethane Bushing Upgrade Mazda CX5 Skyactiv #automobile #mazdacars
Protoflex Polyurethane Bushing Upgrade Mazda CX5 Skyactiv #automobile #mazdacars
Переглядів 929Місяць тому
Upgrade your Lower Arm Bushing to PU Protoflex bushing by Protoflex Indonesia. You will get : Sporty Feel sensation Increase Stability More rigid Handling more responsive & direct If you are overseas and interested to get one kit. DM me on IG @felixdan_
Replace Cross Member subframe & Lower Arm Assy. These one is Rusty and Crusty. #automobileReplace Cross Member subframe & Lower Arm Assy. These one is Rusty and Crusty. #automobile
Replace Cross Member subframe & Lower Arm Assy. These one is Rusty and Crusty. #automobile
Переглядів 5752 місяці тому
Datsun Go . Part renewal Subframe cross member and Lower control arm assy.
How to replace DRL bulb P13W on Mazda CX 5 2012 - 2014. Pre Facelift. #diyHow to replace DRL bulb P13W on Mazda CX 5 2012 - 2014. Pre Facelift. #diy
How to replace DRL bulb P13W on Mazda CX 5 2012 - 2014. Pre Facelift. #diy
Переглядів 6932 місяці тому
How to replace DRL bulb on Mazda CX 5. 2012 - 2014. Pre Facelift. P13W Bulb.
How to replace Mazda Proximity Keyfob battery DIY. CR2025 #diy #automobile #cartokHow to replace Mazda Proximity Keyfob battery DIY. CR2025 #diy #automobile #cartok
How to replace Mazda Proximity Keyfob battery DIY. CR2025 #diy #automobile #cartok
Переглядів 1,3 тис.2 місяці тому
Honda Accord CR2 2013 - 2017. How to replace Reverse Rear view camera.Honda Accord CR2 2013 - 2017. How to replace Reverse Rear view camera.
Honda Accord CR2 2013 - 2017. How to replace Reverse Rear view camera.
Переглядів 1872 місяці тому
Who has the similar problems ? with a car close to 10 year old. Some Electronics features such Back up Reverse camera starting to fail. Showing a black screen when the car put in reverse. This car have the issue so we gone ahead and replace the defected camera with the Original Honda replacement part. Honda Accord Backup Rear camera part number 39530-T2A-U11. Enjoy this short DIY Video. Please ...

КОМЕНТАРІ

  • @martinneychev1661
    @martinneychev1661 День тому

    Nice.... i have changed spark plugs but didn't check this. Now i will do it :) great video

  • @popeyevalls
    @popeyevalls День тому

    Hello Felix! My 2013 mazda cx5 sport 2.0 has poor acceleration until I fully press the accelerator. The hesitation is very noticeable but theres no exhaust smoke, no jerking, no sputtering or dying out and no check engine lights. The only thing ive noticed recently when this started was my car would not start (push button) until I used my spare key fob. The OBDII sensor gave me 2 codes. U401-00 and U3003-16. And I was told tge battery voltage circuit voltage was below threshold. Sooooo....any ideas? Also, ever since I bought it used (169000 miles) till today (181000 miles) the push start button has always been flashing orange. Please help!

    • @FelixDanGarasiAuto
      @FelixDanGarasiAuto День тому

      is your battery in a good cond ? how bout your key fob battery is the battery good ?

  • @ghozicoba
    @ghozicoba 2 дні тому

    Mas mw tanya.. Urutan bleeding untuk cx5 dari ban sisi mana y?

    • @FelixDanGarasiAuto
      @FelixDanGarasiAuto 2 дні тому

      Sequencenya mulai yg terjauh dari Brake master cylinder . Belakang Kiri , Belakang Kanan , Depan Kiri (Passenger) & Depan Kanan (Driver).

    • @ghozicoba
      @ghozicoba 2 дні тому

      Thanks mas felix

  • @user-wb1no6ds7x
    @user-wb1no6ds7x 3 дні тому

    Would the same theory works for the MT version?

  • @LouSassoleS
    @LouSassoleS 3 дні тому

    Geeat video. I have the same issue, i am wondering did you gap the spark plugs or just installed them without gapping?

  • @charlesbartholomew2910
    @charlesbartholomew2910 4 дні тому

    The fakes are getting better looking now, aren't they. You really have to eye them closely to see the differences.

    • @FelixDanGarasiAuto
      @FelixDanGarasiAuto 4 дні тому

      hell yeah . i nearly got my self fooled. But something inside of me had a second thought and find further info its just too good to be true knaw mean ?

  • @stevelewis8394
    @stevelewis8394 4 дні тому

    Very few Mazda Skyactiv owners undertake this job themselves and it does not get done during servicing yet there plenty of high mileage (120k+) Skyactiv engines in service seemingly performing well without complaint - how ? Does this job really need doing at all ?

    • @FelixDanGarasiAuto
      @FelixDanGarasiAuto 4 дні тому

      In some countries that only receive n have a low quality fuel will suffer from this carbon build up. So yes i still recommend this service.

    • @stevelewis8394
      @stevelewis8394 3 дні тому

      @@FelixDanGarasiAuto Would regular treatment with carbon cleaning fuel additives such as Redex mitigate this problem?

  • @rizaldeaurelio881
    @rizaldeaurelio881 5 днів тому

    What did you do to close the intake valve 1 and 3? Since it was opened?

    • @FelixDanGarasiAuto
      @FelixDanGarasiAuto 5 днів тому

      you have to wait for other cylinder to be cleaned out first then repeat the proses for valve 1 & 3 which we have to close em down prior spraying the intake valves.

  • @andirizkialghaniridata9015
    @andirizkialghaniridata9015 9 днів тому

    Makasih koh tutorialnya sangat bermanfaat sekali koh, koh mau tanya kalo gigi nya ngestuck muku ngga naik untuk mazda cx 5 kenapa ya koh? Even udah di pakai manual mode tulisan di instrumen clustermya m ajja koh nggada 1,2,3 nya koh, makasih koh

    • @FelixDanGarasiAuto
      @FelixDanGarasiAuto 9 днів тому

      mungkin shift solenoid / sensor ud mulai kena , harus periksa transmisi di bengkel terpercaya. 🙏🏼

  • @splaw120
    @splaw120 9 днів тому

    I’ve never bothered changing these internal filters unless it’s required by the manufacturer. It’s extra annoying when the manufacturer doesn’t provide a pan gasket. Just drain and fill occasionally 🙂

    • @FelixDanGarasiAuto
      @FelixDanGarasiAuto 9 днів тому

      yeap, this also could do the job just fine just do drain n fill occasionally . 👍🏼👍🏼

  • @davidedeandaf6235
    @davidedeandaf6235 9 днів тому

    Very good video...easy...and clear ..! tks

  • @thai6468
    @thai6468 9 днів тому

    hi what induction kit do you have?

  • @Baguettes12
    @Baguettes12 10 днів тому

    What is your kit admission ?

  • @yuant1533
    @yuant1533 11 днів тому

    I have a 2021 Mazda Cx-30 turbo. How often should this be done?

  • @patriciovillarroel8403
    @patriciovillarroel8403 11 днів тому

    Muchísimas gracias por tu vídeo , vivo aquí en el campo en Pichilemu Chile, y corte correa, siempre tengo repuestos, pero no sabía cómo sacar y poner el repuesto, estoy muy agradecido de ti.

    • @FelixDanGarasiAuto
      @FelixDanGarasiAuto 11 днів тому

      De nada, me alegro mucho de que este vídeo pueda ayudar a su servicio.

  • @zahariafelix
    @zahariafelix 12 днів тому

    Hi Felix. Like always a very comprehensive clip and very useful. Can you help me please locate the thermostat on a Honda CRV 2007 2.0 automatic, just like yours. And you can make a clip with this as wel if you can please. Thank you

    • @FelixDanGarasiAuto
      @FelixDanGarasiAuto 12 днів тому

      thank you man. So the thermostat assy located on the upper coolant hose on the engine block.

    • @zahariafelix
      @zahariafelix 12 днів тому

      Thank you Felix. You have helped me once again. I like your clips, very easy to fallow your instructions.

  • @mchan1983
    @mchan1983 12 днів тому

    Can I slowly push the butterfly valve open to clean it and without disconnecting the battery? Thanks.

    • @FelixDanGarasiAuto
      @FelixDanGarasiAuto 12 днів тому

      no i would not recommend. As you might damage the TB assy.

  • @dogukanertan4707
    @dogukanertan4707 13 днів тому

    We're going to run it with the radiator cap open, isn't it right? So when do we turn it off? After the engine fan comes on? Can you help?

    • @FelixDanGarasiAuto
      @FelixDanGarasiAuto 13 днів тому

      yes that is correct , run until the fan kicks in and you can turn off the car and top up the coolant fluid.

  • @kaana4203
    @kaana4203 14 днів тому

    Om, abis ngisi 4 liter kan mobil dipanasin 5 menit tuh, rumah filter udaranya dipasang dulu gak atau biarin aja kebuka saluran yg ke trotel body itu?? Kalau gak dipasang apa tetap disumbat pakai kain atau dipasang dulu kah semua beserta filter udaranya sebelum dipanasin?

    • @kaana4203
      @kaana4203 14 днів тому

      Semoga cepat dibalas om, sekarang lagi gantung kerjaan saya sampai step isi 4 liter ini 😅

    • @FelixDanGarasiAuto
      @FelixDanGarasiAuto 14 днів тому

      @@kaana4203 bagian bawah kotak filter tdk perlu di pasang . hanya porsi atas dan MAF sensor di pasang. Panasi 10 menitan saja. Terus check & fill kembali sampai level titik tengah pada dipstick nya.

    • @kaana4203
      @kaana4203 14 днів тому

      @@FelixDanGarasiAuto 10 menit panasin baru oper2 transmisinya om?

    • @FelixDanGarasiAuto
      @FelixDanGarasiAuto 14 днів тому

      @@kaana4203 iya btul

    • @kaana4203
      @kaana4203 14 днів тому

      Abis isi lagi dinyalain lagi gak om, apa ditancepin aja trus tunggu bentar langsung cabut lagi dipstiknya?

  • @rio5610
    @rio5610 15 днів тому

    I want install on my cortez, its only front? Or both

  • @rio5610
    @rio5610 15 днів тому

    Mantap koh, iru depan aja yg diganti?

  • @dracy7024
    @dracy7024 16 днів тому

    I get 17.5kmpl average is this okay ? 90% highway speed of 100> 120. Sparkplugs changed and it went up from 17.3 to 17.5 Wheel alignment done Tyre pressure good. Oil changed.

    • @FelixDanGarasiAuto
      @FelixDanGarasiAuto 16 днів тому

      yeh man that is actually a very good numbers . 👍🏼👍🏼

  • @montecristo8624
    @montecristo8624 17 днів тому

    Greetings from London. Done this job and others on my MK4 CRV thanks to your videos. It has 55k miles on it but I am all about preventative maintenance. Cheers

    • @FelixDanGarasiAuto
      @FelixDanGarasiAuto 14 днів тому

      you r welcome sir lemme know if you need any tips n trick on your Honda CRV.

    • @montecristo8624
      @montecristo8624 14 днів тому

      Thank-you. I had difficulty in opening my airfilter box to clean.my Mass Air Flow Sensor. There's something behing that doesnt enable me fully remove the lid. Anyntips?

  • @SecurityZone1
    @SecurityZone1 18 днів тому

    Are they supposed to be iridium tips?

    • @FelixDanGarasiAuto
      @FelixDanGarasiAuto 18 днів тому

      Yes i had bought Denso Twin tip Iridium. But the seller had send me the fake / counterfeit ones. So i had to buy another set that is Genuine Denso to prove em wrong. Please check my other post with pics to have better understanding.

    • @SecurityZone1
      @SecurityZone1 18 днів тому

      @@FelixDanGarasiAuto damn what a shame! 🤦🏽‍♂️ I'm glad your car was ok and that you realized what happened and got the real ones from a known rep 👍🏽

    • @FelixDanGarasiAuto
      @FelixDanGarasiAuto 18 днів тому

      @@SecurityZone1 yeah i kept fighting with the seller as he insist me just to install it and pray everything will go fine no trouble. But no way i want to take the chance to ruin my daily vehicle for this POS fake product.

    • @SecurityZone1
      @SecurityZone1 18 днів тому

      @@FelixDanGarasiAuto smart man! 💯 I would have done exactly the same thing for mine

  • @montecristo8624
    @montecristo8624 18 днів тому

    Greetings from London. Thanks to your video gained the confidence to clean my TB on my 2013 mk4 crv. Cheers

  • @montecristo8624
    @montecristo8624 18 днів тому

    Hi Felix. A bit late to the party but got a mk4 CRV in London, and your videos are very helpful priceless. There is nothing wrong with my solenoid. Do frequent oil changes prevent vtec solenoid from going wrong? Please advise. Cheers

    • @FelixDanGarasiAuto
      @FelixDanGarasiAuto 17 днів тому

      yes frequent oil changes would prevent the vtec solenoid from going kaput.

  • @jamesjay1987
    @jamesjay1987 19 днів тому

    I have cx3 2019 1.8d and got message about a lot of water passed on fuel sediment filter. I removed the message via forscan but I need to drain the filter. I dunno where exactly is. Anyone know where I am gonna look for this?

    • @FelixDanGarasiAuto
      @FelixDanGarasiAuto 18 днів тому

      behind the battery , check it there.

    • @jamesjay1987
      @jamesjay1987 18 днів тому

      @@FelixDanGarasiAuto thnx friend I am gonna look

    • @jamesjay1987
      @jamesjay1987 18 днів тому

      @@FelixDanGarasiAuto It was under the car, near the tank and left rear tyre.

    • @FelixDanGarasiAuto
      @FelixDanGarasiAuto 18 днів тому

      @@jamesjay1987 ahh cool you found it :)

  • @suratdida
    @suratdida 20 днів тому

    How you know its fake?

    • @FelixDanGarasiAuto
      @FelixDanGarasiAuto 20 днів тому

      price wise way cheaper on the counterfeits ones & the overall quality were very rough. I had done test with multimeter and it scores a unstable readings was abit off and high values Ohms. Thats when i notice something not right. Then i went to buy another authentic set from Denso factory & notice the price difference was up above the Counterfeit ones and maan the quality difference was there. Look at my posts ive added couple of photos of a Genuine Vs Fake Denso Twin tip Iridium.

  • @AdiAdi-og7un
    @AdiAdi-og7un 21 день тому

    Bang mau tanya Mazda tribute v6 oli metik nya berapa liter bag? Tipe oli apa bang yg di pakai?

    • @FelixDanGarasiAuto
      @FelixDanGarasiAuto 21 день тому

      system AT nya menggunakan 10liter. Jika hanya drain & fill menggunakan 3.8liter sd 4liter sekali servis ganti oli. Lakukan ganti oli berkala setiap 20rb sd 30rb sudah effektif tanpa buka AT karter assy.

    • @AdiAdi-og7un
      @AdiAdi-og7un 21 день тому

      @@FelixDanGarasiAuto oli merek apa yg di pakai bang?

    • @AdiAdi-og7un
      @AdiAdi-og7un 21 день тому

      @@FelixDanGarasiAuto untuk oli transmisi metic?

    • @FelixDanGarasiAuto
      @FelixDanGarasiAuto 21 день тому

      @@AdiAdi-og7un cb lihat spek dari buku manual panduan mobil. Kalo merk sesuaikan budget masing masing. Sperti Castrol , PTT Fluid , Pertamina , Total , Aisin Dsb.

    • @AdiAdi-og7un
      @AdiAdi-og7un 21 день тому

      @@FelixDanGarasiAuto siap bang bisa minta nmr hp nya bang? spya bagus klu komunikasih langsung 🙏🙏

  • @Username-es1iy
    @Username-es1iy 24 дні тому

    More Mazda videos please!

  • @graceross3690
    @graceross3690 24 дні тому

    This doesn’t tell you shit!!!

  • @ed370zx3
    @ed370zx3 25 днів тому

    Nice gap! 😂

    • @FelixDanGarasiAuto
      @FelixDanGarasiAuto 25 днів тому

      😂😂😂😂😂 and the seller still admits they are original Denso spark plugs.

  • @doernerc
    @doernerc 26 днів тому

    Thank you for your video! It helped me clean out the fan which was causing noise due to some leaves that got inside. Saved me a trip to the dealer. Thanks again!

  • @schwinnbiking
    @schwinnbiking 26 днів тому

    how often do you do this?

    • @FelixDanGarasiAuto
      @FelixDanGarasiAuto 26 днів тому

      best is at every 40000kms so you dont over spent on your maintenance $$.

    • @schwinnbiking
      @schwinnbiking 25 днів тому

      @@FelixDanGarasiAuto I haven't ever done it but the PVC was replaced when the car was bought at 170k km (now 225k). I saw also ppl putting a oil catch can between pvc and intake but then theres others recommending against this saying the design it burns up again as goes through intake but at same time it does build up in the intake. I bought a catch can then was hesitant to even install.

    • @schwinnbiking
      @schwinnbiking 25 днів тому

      @@FelixDanGarasiAuto I do seafoam every other year and keep an eye out on oil level. Its not burning much now maybe 500ml every oil change. My oil changes are long tho 12k km as per manual.. maybe not the best.

    • @FelixDanGarasiAuto
      @FelixDanGarasiAuto 25 днів тому

      @@schwinnbiking watch my oil catch can install , they actually works and slowing down the process of carbon build up. Best bang for buck mod for these cars.

    • @schwinnbiking
      @schwinnbiking 22 дні тому

      @@FelixDanGarasiAuto I did watch it, I think more than once and first time years ago when I bought the cx5. I might just do it and if I want to remove I can just interconnect the two tubes and remove the catch can. I'm more tempted though to do it all at once since I have to remove the intake manifold. 1) PVC 2) catch can rough in/install 3) clean the intake ports/manifold etc.. like in your video.

  • @davidlee5903
    @davidlee5903 Місяць тому

    The bolt on the Drivers side is an absolute bastard to locate and remove, its not as its shown on the video

    • @FelixDanGarasiAuto
      @FelixDanGarasiAuto Місяць тому

      yeah it was a very hard one to access . the key is patience my friend hehe.

  • @f4tc0w
    @f4tc0w Місяць тому

    How much fluid is in the pan if I just want to do a drain and fill?

  • @Roottech25
    @Roottech25 Місяць тому

    what are the two first hose you remove? I have a mazda 3 and I wonder what are they....

    • @FelixDanGarasiAuto
      @FelixDanGarasiAuto Місяць тому

      the first two hose i remove are rocker cover breather hose & intake manifold breather hose .

  • @jamesdegaugh4316
    @jamesdegaugh4316 Місяць тому

    disconect them horn s in the cars

  • @netgear5306
    @netgear5306 Місяць тому

    Kok aku beli harga 75rb ya?jangan² palsu ni yg kubeli...

    • @FelixDanGarasiAuto
      @FelixDanGarasiAuto Місяць тому

      kurang tahu si kalo itu. beli dari dealer aja biar aman.

    • @netgear5306
      @netgear5306 Місяць тому

      @@FelixDanGarasiAuto aku beli olshop....ok ...sempat mau kupasang nanti...itu cara lepas slangnya tgl ditekan tarik ya...biar ga kebengkel lagi.makasih ya

  • @shandebuggam8783
    @shandebuggam8783 Місяць тому

    One of the best mechanical videos

  • @user-zn7pd2ud9q
    @user-zn7pd2ud9q Місяць тому

    😂😂😂😂

  • @taichihead42
    @taichihead42 Місяць тому

    After cleaning my throttle body my electonic fuel gauge is fluctuating a little. In other words my cars range on a full tank is 810 km's. So my range digital display is going up and down a little.

    • @FelixDanGarasiAuto
      @FelixDanGarasiAuto Місяць тому

      so thats a good thing right ?

    • @taichihead42
      @taichihead42 Місяць тому

      Hi Felix Dan, how's life in your part of the world. Yes i guess that is a good thing but its like the fuel gauge computer doesn't know exactly what the range is as i drive, for example when i got into my car today, my fuel range was approximately 410 km's i drove about 18 miles which is 30 kms. My fuel gauge is still reading 400 km's range. My car seems to be using way less fuel but my computer seems to be a little confused while i am driving and keeps recalculating the driving range. Before i cleaned my throttle body the digital clock would drop down digit by digit in a much more orderly fashion, more predictable. BTW my throttle body was dirty and some of the carbon would not come off, I kept the old gasket as it was perfect. I followed yr instructions very carefully and made sure not to touch the butterfly value or open it. I do a lot of maintenance on my car. My Mazda is very simple to work on. I very rarely let anyone touch it as i prefer to fix things myself. God bless you brother.🙏 Love yr channel.

    • @taichihead42
      @taichihead42 Місяць тому

      ​First time cleaning throttle body in 5 years from new. 100,000km or 60,000 miles. Lots more power and idling perfect🙏

    • @FelixDanGarasiAuto
      @FelixDanGarasiAuto Місяць тому

      @@taichihead42 yeap give it a day or two. The computer will adjust the fuel range by itself. 😁👍🏼 Thank you so much for the supports very much appreciated.

  • @sebbbou5455
    @sebbbou5455 Місяць тому

    What do to take to remove old rtv gasket? Any gasket remover spray? Thanks

  • @kingleo9981
    @kingleo9981 Місяць тому

    Thanks man, dealership tryna charge way too damn much for this smh (Bay Area) 😑 what a ripoff

  • @ghssanalkhwyter9754
    @ghssanalkhwyter9754 Місяць тому

    Can you tell us which hose is in to the catch can and which one is out ?

    • @FelixDanGarasiAuto
      @FelixDanGarasiAuto Місяць тому

      please watch this video Wuling Almaz RS Cortez. How to clean Inlet Turbo & Oil catch can Install & Maintenance. ua-cam.com/video/1WG1C1tkU30/v-deo.html

    • @ghssanalkhwyter9754
      @ghssanalkhwyter9754 Місяць тому

      @@FelixDanGarasiAuto thank you

  • @manggoez
    @manggoez Місяць тому

    Bang kalo default thermostat part numbernya berapa? emang beda sama yang baru dipasang?

    • @FelixDanGarasiAuto
      @FelixDanGarasiAuto Місяць тому

      beda part number dengan phase 1 atau phase 2 . Yg di thermostat ini adalah pakai yg ud di revisi di Almaz RS.

    • @manggoez
      @manggoez Місяць тому

      @@FelixDanGarasiAuto i see, terimakasih buat penjelasannya

    • @FelixDanGarasiAuto
      @FelixDanGarasiAuto Місяць тому

      @@manggoez sm sm 🤝

  • @samuelportillo4957
    @samuelportillo4957 Місяць тому

    Excelent video